Coating Inspection Equipment

The Elcometer Blasting Inspection Kit is a surface preparation inspection kit providing a range of inspection equipment to test surface profile and surface contamination of blasted profiles.

The Elcometer 456 Coating Thickness Gauge is available with a wide range of separate interchangeable probes; providing greater coating thickness measurement flexibility on metal substrates.

All Elcometer 456 Coating Thickness Gauge probes are fully interchangeable and are available in a number of designs and scale ranges to meet your specific application.

All Elcometer 456 Coating Thickness Gauge probes are fully interchangeable and are available in a number of designs and scale ranges to meet your specific application.

Elcometer probes have a maximum operating temperature of 80°C (176°F)* Separate ferrous probes have a maximum operating temperature of 150°C (300°F)* Hi-Temperature PINIP™ has a maximum operating temperature of 250°C (480°F)*

The rugged Elcometer 319 Dew Point Meter is designed to measure and record all relevant climatic parameters required to determine whether the conditions are suitable for painting.

The Elcometer 224 Digital Surface Profile Gauge provides the very latest in surface profile measuring technology for measuring surface profile on either flat or curved surfaces.

The Elcometer 124 Thickness Gauge is used to measure the peak-to-valley height of a surface profile moulded in the Elcometer 122 Testex® Replica Tape. Metric and Imperial versions available Quick and easy to use Anvil pressure as required in the Standards The Elcometer 122 Testex® Replica Tape is designed to provide a permanent mould of […]

It is essential that the level of contaminants on a surface is measured prior to the application of the coating to ensure the quality of the coating and that its optimum lifetime is achieved.

The Elcometer 142 Dust Tape Test Kit allows assessment of the quantity and size of dust particles on surfaces prepared for painting.

The Elcometer 270 Pinhole Tester range utilises the wet sponge technique and has been designed to set a new standard for wet sponge pinhole detectors.

The Elcometer 107 Cross Hatch Cutter for adhesion tests provides an instant assessment of the quality of the bond to the substrate.

The Elcometer 121/4 Paint Inspection Gauge (P.I.G) is a hand-held paint gauge that offers a quick, versatile method of coating examination and measurement in a portable, easy-to-use format.

The Elcometer 102 Needle Pressure Gauge is designed to measure air pressure in blast and air hoses.