In combination with our proven SKYRAIL, the battery-operated ACX POWER ASCENDER forms a highly flexible facade access system for the simple cleaning and maintenance of complex building structures.

The static workhouse in the EDELRID stable. The Edelrid Safety Super II series guarantee maximum abrasion resistance, minimum shrinkage and low elongation values.

The Elcometer Blasting Inspection Kit is a surface preparation inspection kit providing a range of inspection equipment to test surface profile and surface contamination of blasted profiles.

The Elcometer 456 Coating Thickness Gauge is available with a wide range of separate interchangeable probes; providing greater coating thickness measurement flexibility on metal substrates.

All Elcometer 456 Coating Thickness Gauge probes are fully interchangeable and are available in a number of designs and scale ranges to meet your specific application.

All Elcometer 456 Coating Thickness Gauge probes are fully interchangeable and are available in a number of designs and scale ranges to meet your specific application.

Elcometer probes have a maximum operating temperature of 80°C (176°F)* Separate ferrous probes have a maximum operating temperature of 150°C (300°F)* Hi-Temperature PINIP™ has a maximum operating temperature of 250°C (480°F)*

The rugged Elcometer 319 Dew Point Meter is designed to measure and record all relevant climatic parameters required to determine whether the conditions are suitable for painting.

The Elcometer 224 Digital Surface Profile Gauge provides the very latest in surface profile measuring technology for measuring surface profile on either flat or curved surfaces.

The Elcometer 124 Thickness Gauge is used to measure the peak-to-valley height of a surface profile moulded in the Elcometer 122 Testex® Replica Tape. Metric and Imperial versions available Quick and easy to use Anvil pressure as required in the Standards The Elcometer 122 Testex® Replica Tape is designed to provide a permanent mould of […]

It is essential that the level of contaminants on a surface is measured prior to the application of the coating to ensure the quality of the coating and that its optimum lifetime is achieved.

The Elcometer 142 Dust Tape Test Kit allows assessment of the quantity and size of dust particles on surfaces prepared for painting.

The Elcometer 270 Pinhole Tester range utilises the wet sponge technique and has been designed to set a new standard for wet sponge pinhole detectors.

The Elcometer 107 Cross Hatch Cutter for adhesion tests provides an instant assessment of the quality of the bond to the substrate.

The Elcometer 121/4 Paint Inspection Gauge (P.I.G) is a hand-held paint gauge that offers a quick, versatile method of coating examination and measurement in a portable, easy-to-use format.

The Elcometer 102 Needle Pressure Gauge is designed to measure air pressure in blast and air hoses.

A tool bag for very large and heavy lifting. The bag is designed for the purpose of placing a whole pallet inside the bag.

Tool bag made from high quality D1800*900 flat-coated material that offers great volume and WLL. Along with the bag you will find an upright plastic solution making the inside of the bag more accesible.

It has been around for many years but continues to be one of our most coveted units. The bag is straight forward and easy to handle and is perfectly suited for general tools

Lifting bag and back pack combined. The bag is available in Black or Orange. The orange version is made of tarpaulin and is therefore water repellent.

Rescue devices, including unused ones, which are kept in reserve for emergencies, must be inspected once a year. With the SEAL PAC this is simplified.

The Skylotec Milan 2.0 Hub is one of the world's most popular auto controlled rate rescue devices, which enables two people to be evacuated simultaneously from a structure, be that a wind turbine, tower crane, telecomms mast etc.

Durable and rugged marine defibrillator Bronze, Silver and Gold packages available – see datasheet below IP55 rated built to military standards Marine GL Type Approved Automatically analyses if shock is required Simple one button press to shock Portable design with integral handle and weighs just 1.9Kg Standard capacity Lithium battery pack (125 shocks, 8 hrs. […]

This is a robust, compact and lightweight stretcher kit made from a flexible material. It's combined to a smooth finish allowing easy sliding and permits the stretcher to be rolled width ways or length ways to facilitate transport.

Introducing our Waterproof Fist Aid Kit. Designed to protect the contents from water and moisture. It is especially useful for activities and environments where there is a high likelihood of exposure to water or wet conditions, such as boating, water sports, camping, hiking, or outdoor adventures in rainy or humid climates.

Söll GlideLoc® fall arrester type Universal II with self-locking karabiner. Ensures the connection between the full body harness and the GuideRail. With a new energy absorbing element.

The lightweight Petzl Strato Vent helmet has an adjustable strength chinstrap to cater for work at height, the Wind power generation sector and ground work. The Petzl Centrefit and Flip&Fit systems ensure a comfortable fit and easy storage. This helmet replaces the Alveo Vent helmet.

The Petzl Volt Wind harness is a Fall Arrest, work positioning and restraint harness. Unlike the European version, it does not have a ventral Fall Arrest point. It replaces the old Petzl Volt Wind C72WFA harness.

The Kong Frog is a revolutionary directional connector with an automatic clamping action that engages when it touches the anchor point.

The 2020 Petzl Absorbica Y MGO International version is a twin leg lanyard with pre-installed MGO connectors. It provides continuous protection when you climb on a vertical structure or attach to a horizontal lifeline with a need to pass intermediate anchors.

A special model of the popular RDS Rapid Donning Suit especially made to meet the demands of the offshore industry. Collar structure is open, which eases donning and enables ventilation in warm weather. Material is Gore-Tex® fabric based upon the ePTFE membrane, allowing vapour to get through but remaining completely watertight.

Duro Solas – 275N Twin chamber lifejacket that is often used commercially in wind farms, superyachts and oil rigs where Solas approved lifejackets are required.

The GRILLON MGO lanyard is used to make work positioning systems and to complement a fall-arrest system. Its length can be very easily and precisely adjusted as necessary for comfortable positioning at the work station.

The Premium Plus Complete Rope Access Equipment Kit - includes Petzl ID / ASAP Lock Premium Plus kit

The Petzl Astro Bod Fast harness is Petzl’s harness solution for Rope Access. The integrated CROLL L chest ascender sits lower than the old Petzl Avoa Croll for more efficient rope ascents.

The Petzl I’D Evac descender featuring auto-locking and anti-panic functions has been designed for lowering from an anchor.

The Petzl ASAP Lock mobile fall arrester with locking function is the market leading back-up device for rope access systems.

The Ascension handled rope clamp is designed for rope ascents and features an over-moulded grip and ergonomic upper part for a comfortable and powerful grip when pulling with one or two hands. The Ascension handled rope clamp has a wide lower hole for easily attaching two carabiners for a lanyard and footloop.

The S-Tec Duck R is an industrial rope access back up device that complies to the EN12841 standard and is tested for a two person rescue load.

The Petzl adjustable Grillon hook is used to make work positioning systems, to complement a fall-arrest system.

The Petzl William Triact Karabiner is a pear shaped karabiner with wide-opening suitable for organizing at belays and belaying with a Munter hitch.

The Petzl Pro Traxion is a very high-efficiency, drop-resistant progress-capture pulley with swivel.

The Petzl Rescue is a high strength, high efficiency pulley designed for heavy loads and intensive use by rescue professionals.

The stainless steel wire slings / strops have the same physical dimensions and handling properties as the galvanised versions, but with reduced spark potential and increased corrosion resistance.

The stainless steel wire slings / strops have the same physical dimensions and handling properties as the galvanised versions, but with reduced spark potential and increased corrosion resistance. IMPORTANT NOTICE: These are EN795 PPE Anchor Strops NOT EN13414 lifting slings. FAQ’s Q.What is the size of the eyelet? A.The eyelets are teardropped shaped: Approx 4cm long, 2cm wide […]

Lyon Canvas Rope Protector - Canvas wrap-around rope protector with velco strip along its length to enclose the rope. Eyelet and fixing cord at one end to stop it slipping down the rope.

This mini lifting bag is one of the front runners in the industry and is mainly used for hoisting minor tools in daily work situations. Due to its discrete size this mini tool bag can also be secured to the technicians belts and used when working in heights.